SnS + 2HNO3 → SnO2 + N2O4 + H2S↑
Last updated:
The reaction of tin(II) sulfide and nitric acid yields tin(IV) oxide, dinitrogen tetraoxide, and hydrogen sulfide (Other reactions are here). This reaction is an oxidation-reduction reaction and is classified as follows:
Table of contents
Reaction data
Chemical equation
- Reaction of tin(II) sulfide and nitric acid
General equation
- Reaction of reducing species and oxidizing species
- Reducing speciesReducing agent + Oxidizing speciesOxidizing agent ⟶ ProductOxidation product + ProductReduction product
Oxidation state of each atom
- Reaction of tin(II) sulfide and nitric acid
Reactants
| Chemical formula | Name | Coefficient | Type | Type in general equation |
|---|---|---|---|---|
| SnS | Tin(II) sulfide | 1 | Reducing | Reducing |
| HNO3 | Nitric acid | 2 | Oxidizing | Oxidizing |
Products
| Chemical formula | Name | Coefficient | Type | Type in general equation |
|---|---|---|---|---|
| SnO2 | Tin(IV) oxide | 1 | Oxidized | – |
| N2O4 | Dinitrogen tetraoxide | 1 | Reduced | – |
| H2S | Hydrogen sulfide | 1 | – | – |
Thermodynamic changes
Changes in standard condition
- Reaction of tin(II) sulfide and nitric acid◆
ΔrG −195.9 kJ/mol K 2.09 × 1034 pK −34.32
| Standard enthalpy of reaction ΔrH° kJ · mol−1 | Standard Gibbs energy of reaction ΔrG° kJ · mol−1 | Standard entropy of reaction ΔrS° J · K−1 · mol−1 | Standard heat capacity of reaction at constant pressure ΔrCp° J · K−1 · mol−1 | |
|---|---|---|---|---|
per 1 mol of Equation | −173 | −195.9 | 79.1 | −39.5 |
per 1 mol of | −173 | −195.9 | 79.1 | −39.5 |
per 1 mol of | −86.5 | −97.95 | 39.5 | −19.8 |
per 1 mol of | −173 | −195.9 | 79.1 | −39.5 |
per 1 mol of | −173 | −195.9 | 79.1 | −39.5 |
per 1 mol of | −173 | −195.9 | 79.1 | −39.5 |
Changes in aqueous solution (1)
- Reaction of tin(II) sulfide and nitric acid◆
ΔrG −134.8 kJ/mol K 4.13 × 1023 pK −23.62
| Standard enthalpy of reaction ΔrH° kJ · mol−1 | Standard Gibbs energy of reaction ΔrG° kJ · mol−1 | Standard entropy of reaction ΔrS° J · K−1 · mol−1 | Standard heat capacity of reaction at constant pressure ΔrCp° J · K−1 · mol−1 | |
|---|---|---|---|---|
per 1 mol of Equation | −106 | −134.8 | 97.5 | 353.5 |
per 1 mol of | −106 | −134.8 | 97.5 | 353.5 |
per 1 mol of | −53.0 | −67.40 | 48.8 | 176.8 |
per 1 mol of | −106 | −134.8 | 97.5 | 353.5 |
per 1 mol of | −106 | −134.8 | 97.5 | 353.5 |
per 1 mol of | −106 | −134.8 | 97.5 | 353.5 |
Changes in aqueous solution (2)
- Reaction of tin(II) sulfide and nitric acid◆
ΔrG −129.1 kJ/mol K 4.14 × 1022 pK −22.62
| Standard enthalpy of reaction ΔrH° kJ · mol−1 | Standard Gibbs energy of reaction ΔrG° kJ · mol−1 | Standard entropy of reaction ΔrS° J · K−1 · mol−1 | Standard heat capacity of reaction at constant pressure ΔrCp° J · K−1 · mol−1 | |
|---|---|---|---|---|
per 1 mol of Equation | −125 | −129.1 | 13 | – |
per 1 mol of | −125 | −129.1 | 13 | – |
per 1 mol of | −62.5 | −64.55 | 6.5 | – |
per 1 mol of | −125 | −129.1 | 13 | – |
per 1 mol of | −125 | −129.1 | 13 | – |
per 1 mol of | −125 | −129.1 | 13 | – |
Thermodynamic data of reactants
| Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
|---|---|---|---|---|
| SnS (cr) | -100[1] | -98.3[1] | 77.0[1] | 49.25[1] |
| SnS (g) | 119.2[1] | – | – | – |
| HNO3 (l) | -174.10[1] | -80.71[1] | 155.60[1] | 109.87[1] |
| HNO3 (g) | -135.06[1] | -74.72[1] | 266.38[1] | 53.35[1] |
| HNO3 (ai) | -207.36[1] | -111.25[1] | 146.4[1] | -86.6[1] |
| HNO3 (l) 1 hydrate | -473.46[1] | -328.77[1] | 216.90[1] | 182.46[1] |
| HNO3 (l) 3 hydrate | -1056.04[1] | -811.09[1] | 346.98[1] | 325.14[1] |
* (cr):Crystalline solid, (g):Gas, (l):Liquid, (ai):Ionized aqueous solution
Thermodynamic data of products
| Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
|---|---|---|---|---|
| SnO2 (cr) | -580.7[1] | -519.6[1] | 52.3[1] | 52.59[1] |
| N2O4 (l) | -19.50[1] | 97.54[1] | 209.2[1] | 142.7[1] |
| N2O4 (g) | 9.16[1] | 97.89[1] | 304.29[1] | 77.28[1] |
| H2S (g) | -20.63[1] | -33.56[1] | 205.79[1] | 34.23[1] |
| H2S (ao) | -39.7[1] | -27.83[1] | 121[1] | – |
* (cr):Crystalline solid, (l):Liquid, (g):Gas, (ao):Un-ionized aqueous solution
References
List of references
- 1Janiel J. Reed (1989)The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI UnitsNational Institute of Standards and Technology (NIST)
- ^ ΔfH°, -100. kJ · mol−1
- ^ ΔfG°, -98.3 kJ · mol−1
- ^ S°, 77.0 J · K−1 · mol−1
- ^ Cp°, 49.25 J · K−1 · mol−1
- ^ ΔfH°, 119.2 kJ · mol−1
- ^ ΔfH°, -174.10 kJ · mol−1
- ^ ΔfG°, -80.71 kJ · mol−1
- ^ S°, 155.60 J · K−1 · mol−1
- ^ Cp°, 109.87 J · K−1 · mol−1
- ^ ΔfH°, -135.06 kJ · mol−1
- ^ ΔfG°, -74.72 kJ · mol−1
- ^ S°, 266.38 J · K−1 · mol−1
- ^ Cp°, 53.35 J · K−1 · mol−1
- ^ ΔfH°, -207.36 kJ · mol−1
- ^ ΔfG°, -111.25 kJ · mol−1
- ^ S°, 146.4 J · K−1 · mol−1
- ^ Cp°, -86.6 J · K−1 · mol−1
- ^ ΔfH°, -473.46 kJ · mol−1
- ^ ΔfG°, -328.77 kJ · mol−1
- ^ S°, 216.90 J · K−1 · mol−1
- ^ Cp°, 182.46 J · K−1 · mol−1
- ^ ΔfH°, -1056.04 kJ · mol−1
- ^ ΔfG°, -811.09 kJ · mol−1
- ^ S°, 346.98 J · K−1 · mol−1
- ^ Cp°, 325.14 J · K−1 · mol−1
- ^ ΔfH°, -580.7 kJ · mol−1
- ^ ΔfG°, -519.6 kJ · mol−1
- ^ S°, 52.3 J · K−1 · mol−1
- ^ Cp°, 52.59 J · K−1 · mol−1
- ^ ΔfH°, -19.50 kJ · mol−1
- ^ ΔfG°, 97.54 kJ · mol−1
- ^ S°, 209.2 J · K−1 · mol−1
- ^ Cp°, 142.7 J · K−1 · mol−1
- ^ ΔfH°, 9.16 kJ · mol−1
- ^ ΔfG°, 97.89 kJ · mol−1
- ^ S°, 304.29 J · K−1 · mol−1
- ^ Cp°, 77.28 J · K−1 · mol−1
- ^ ΔfH°, -20.63 kJ · mol−1
- ^ ΔfG°, -33.56 kJ · mol−1
- ^ S°, 205.79 J · K−1 · mol−1
- ^ Cp°, 34.23 J · K−1 · mol−1
- ^ ΔfH°, -39.7 kJ · mol−1
- ^ ΔfG°, -27.83 kJ · mol−1
- ^ S°, 121. J · K−1 · mol−1