2SnF2 + 2HNO3 → SnF4 + SnO2 + 2HNO2
Last updated:
- Reaction of tin(II) fluoride and nitric acid
The reaction of tin(II) fluoride and nitric acid yields tin(IV) fluoride, tin(IV) oxide, and nitrous acid (Other reactions are here). This reaction is an oxidation-reduction reaction and is classified as follows:
Table of contents
Reaction data
Chemical equation
- Reaction of tin(II) fluoride and nitric acid
General equation
- Reaction of reducing species and oxidizing species
- Reducing speciesReducing agent + Oxidizing speciesOxidizing agent ⟶ ProductOxidation product + ProductReduction product
Oxidation state of each atom
- Reaction of tin(II) fluoride and nitric acid
Reactants
| Chemical formula | Name | Coefficient | Type | Type in general equation |
|---|---|---|---|---|
| SnF2 | Tin(II) fluoride | 2 | Reducing | Reducing |
| HNO3 | Nitric acid | 2 | Oxidizing | Oxidizing |
Products
| Chemical formula | Name | Coefficient | Type | Type in general equation |
|---|---|---|---|---|
| SnF4 | Tin(IV) fluoride | 1 | Oxidized | – |
| SnO2 | Tin(IV) oxide | 1 | Oxidized | – |
| HNO2 | Nitrous acid | 2 | Reduced | – |
Thermodynamic changes
Thermodynamic data of reactants
| Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
|---|---|---|---|---|
| SnF2 | – | – | – | – |
| HNO3 (l) | -174.10[1] | -80.71[1] | 155.60[1] | 109.87[1] |
| HNO3 (g) | -135.06[1] | -74.72[1] | 266.38[1] | 53.35[1] |
| HNO3 (ai) | -207.36[1] | -111.25[1] | 146.4[1] | -86.6[1] |
| HNO3 (l) 1 hydrate | -473.46[1] | -328.77[1] | 216.90[1] | 182.46[1] |
| HNO3 (l) 3 hydrate | -1056.04[1] | -811.09[1] | 346.98[1] | 325.14[1] |
* (l):Liquid, (g):Gas, (ai):Ionized aqueous solution
Thermodynamic data of products
| Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
|---|---|---|---|---|
| SnF4 | – | – | – | – |
| SnO2 (cr) | -580.7[1] | -519.6[1] | 52.3[1] | 52.59[1] |
| HNO2 (g) cis | -77.99[1] | -42.94[1] | 248.76[1] | 44.77[1] |
| HNO2 (g) trans | -80.12[1] | -45.24[1] | 249.22[1] | 46.07[1] |
| HNO2 (g) | -79.5[1] | -46.0[1] | 254.1[1] | 45.6[1] |
| HNO2 (ao) | -119.2[1] | -50.6[1] | 135.6[1] | – |
* (cr):Crystalline solid, (g):Gas, (ao):Un-ionized aqueous solution
References
List of references
- 1Janiel J. Reed (1989)The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI UnitsNational Institute of Standards and Technology (NIST)
- ^ ΔfH°, -174.10 kJ · mol−1
- ^ ΔfG°, -80.71 kJ · mol−1
- ^ S°, 155.60 J · K−1 · mol−1
- ^ Cp°, 109.87 J · K−1 · mol−1
- ^ ΔfH°, -135.06 kJ · mol−1
- ^ ΔfG°, -74.72 kJ · mol−1
- ^ S°, 266.38 J · K−1 · mol−1
- ^ Cp°, 53.35 J · K−1 · mol−1
- ^ ΔfH°, -207.36 kJ · mol−1
- ^ ΔfG°, -111.25 kJ · mol−1
- ^ S°, 146.4 J · K−1 · mol−1
- ^ Cp°, -86.6 J · K−1 · mol−1
- ^ ΔfH°, -473.46 kJ · mol−1
- ^ ΔfG°, -328.77 kJ · mol−1
- ^ S°, 216.90 J · K−1 · mol−1
- ^ Cp°, 182.46 J · K−1 · mol−1
- ^ ΔfH°, -1056.04 kJ · mol−1
- ^ ΔfG°, -811.09 kJ · mol−1
- ^ S°, 346.98 J · K−1 · mol−1
- ^ Cp°, 325.14 J · K−1 · mol−1
- ^ ΔfH°, -580.7 kJ · mol−1
- ^ ΔfG°, -519.6 kJ · mol−1
- ^ S°, 52.3 J · K−1 · mol−1
- ^ Cp°, 52.59 J · K−1 · mol−1
- ^ ΔfH°, -77.99 kJ · mol−1
- ^ ΔfG°, -42.94 kJ · mol−1
- ^ S°, 248.76 J · K−1 · mol−1
- ^ Cp°, 44.77 J · K−1 · mol−1
- ^ ΔfH°, -80.12 kJ · mol−1
- ^ ΔfG°, -45.24 kJ · mol−1
- ^ S°, 249.22 J · K−1 · mol−1
- ^ Cp°, 46.07 J · K−1 · mol−1
- ^ ΔfH°, -79.5 kJ · mol−1
- ^ ΔfG°, -46.0 kJ · mol−1
- ^ S°, 254.1 J · K−1 · mol−1
- ^ Cp°, 45.6 J · K−1 · mol−1
- ^ ΔfH°, -119.2 kJ · mol−1
- ^ ΔfG°, -50.6 kJ · mol−1
- ^ S°, 135.6 J · K−1 · mol−1