6FeO + 3SnF4 🔥→ Fe2O3 + 4FeF3 + 3SnO
Last updated:
- Reaction of iron(II) oxide and tin(IV) fluoride
The reaction of iron(II) oxide and tin(IV) fluoride yields iron(III) oxide, iron(III) fluoride, and tin(II) oxide (Other reactions are here). This reaction is an oxidation-reduction reaction and is classified as follows:
Table of contents
Reaction data
Chemical equation
- Reaction of iron(II) oxide and tin(IV) fluoride
General equation
- Reaction of oxidizable species and reducible species
- Oxidizable speciesReducing agent + Reducible speciesOxidizing agent🔥⟶ ProductOxidation product + ProductReduction product
Oxidation state of each atom
- Reaction of iron(II) oxide and tin(IV) fluoride
Reactants
Chemical formula | Name | Coefficient | Type | Type in general equation |
---|---|---|---|---|
FeO | Iron(II) oxide | 6 | Reducing | Oxidizable |
SnF4 | Tin(IV) fluoride | 3 | Oxidizing | Reducible |
Products
Chemical formula | Name | Coefficient | Type | Type in general equation |
---|---|---|---|---|
Fe2O3 | Iron(III) oxide | 1 | Oxidized | – |
FeF3 | Iron(III) fluoride | 4 | Oxidized | – |
SnO | Tin(II) oxide | 3 | Reduced | – |
Thermodynamic changes
Thermodynamic data of reactants
Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
---|---|---|---|---|
FeO (cr) | -272.0[1] | – | – | – |
SnF4 | – | – | – | – |
* (cr):Crystalline solid
Thermodynamic data of products
Chemical formula | Standard enthalpy of formation ΔfH° kJ · mol−1 | Standard Gibbs energy of formation ΔfG° kJ · mol−1 | Standard molar entropy S° J · K−1 · mol−1 | Standard molar heat capacity at constant pressure Cp° J · K−1 · mol−1 |
---|---|---|---|---|
Fe2O3 (cr) | -824.2[1] | -742.2[1] | 87.40[1] | 103.85[1] |
FeF3 (ai) | -1046.4[1] | -840.9[1] | -357.3[1] | – |
FeF3 (aq) | -1016.3[1] | – | – | – |
SnO (cr) | -285.8[1] | -256.9[1] | 56.5[1] | 44.31[1] |
SnO (g) | 15.1[1] | -8.4[1] | 232.11[1] | 31.59[1] |
* (cr):Crystalline solid, (ai):Ionized aqueous solution, (aq):Aqueous solution, (g):Gas
References
List of references
- 1Janiel J. Reed (1989)The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI UnitsNational Institute of Standards and Technology (NIST)
- ^ ΔfH°, -272.0 kJ · mol−1
- ^ ΔfH°, -824.2 kJ · mol−1
- ^ ΔfG°, -742.2 kJ · mol−1
- ^ S°, 87.40 J · K−1 · mol−1
- ^ Cp°, 103.85 J · K−1 · mol−1
- ^ ΔfH°, -1046.4 kJ · mol−1
- ^ ΔfG°, -840.9 kJ · mol−1
- ^ S°, -357.3 J · K−1 · mol−1
- ^ ΔfH°, -1016.3 kJ · mol−1
- ^ ΔfH°, -285.8 kJ · mol−1
- ^ ΔfG°, -256.9 kJ · mol−1
- ^ S°, 56.5 J · K−1 · mol−1
- ^ Cp°, 44.31 J · K−1 · mol−1
- ^ ΔfH°, 15.1 kJ · mol−1
- ^ ΔfG°, -8.4 kJ · mol−1
- ^ S°, 232.11 J · K−1 · mol−1
- ^ Cp°, 31.59 J · K−1 · mol−1